Product Description
Stainless Steel Ge20es Radial Spherical Plain Bearing
model | dimension | Weight | |||||||
GE.E/ES:GE..DO GE..E/ES-2RS GE..DO-2RS | d | D | B | C | D1min | α°≈ | mass |
GE4E | 4 | 12 | 5 | 3 | 6 | 2 | 10 | 16 | 0.0033 | ||
GE5E | 5 | 14 | 6 | 4 | 7 | 3.4 | 17 | 13 | 0.0038 | ||
GE6E | 6 | 14 | 6 | 4 | 8 | 3.4 | 17 | 13 | 0.0042 | ||
GE8E | 8 | 16 | 8 | 5 | 10 | 5.5 | 27 | 15 | 0.0075 | ||
GE10E | 10 | 19 | 9 | 6 | 13 | 8.1 | 40 | 12 | 0.011 | ||
GE12E | 12 | 22 | 10 | 7 | 15 | 10 | 54 | 10 | 0.015 | ||
GE15ES | GE15ES-2RS | 15 | 26 | 12 | 9 | 18 | 17 | 85 | 8 | 0.571 | |
GE17ES | GE17ES-2RS | 17 | 30 | 14 | 10 | 20 | 21 | 106 | 10 | 0.041 | |
GE20ES | GE20ES-2RS | 20 | 35 | 16 | 12 | 24 | 30 | 146 | 9 | 0.068 | |
GE25ES | GE25ES-2RS | 25 | 42 | 20 | 16 | 29 | 48 | 240 | 7 | 0.119 | |
GE30ES | GE30ES-2RS | 30 | 47 | 22 | 18 | 34 | 62 | 310 | 6 | 0.153 | |
GE35ES | GE35ES-2RS | 35 | 55 | 25 | 20 | 39 | 80 | 400 | 6 | 0.233 | |
GE40ES | GE40ES-2RS | 40 | 62 | 28 | 22 | 45 | 100 | 500 | 7 | 0.306 | |
GE45ES | GE45ES-2RS | 45 | 68 | 32 | 25 | 50 | 127 | 640 | 7 | 0.327 | |
GE50ES | GE50ES-2RS | 50 | 75 | 35 | 28 | 55 | 156 | 780 | 6 | 0.546 | |
GE60ES | GE60ES-2RS | 60 | 90 | 44 | 36 | 66 | 245 | 1220 | 6 | 1.045 | |
GE70ES | GE70ES-2RS | 70 | 105 | 49 | 40 | 77 | 315 | 1560 | 6 | 1.55 | |
GE80ES | GE80ES-2RS | 80 | 120 | 55 | 45 | 88 | 400 | 2000 | 6 | 2.31 | |
GE90ES | GE90ES-2RS | 90 | 130 | 60 | 50 | 98 | 490 | 2450 | 5 | 2.75 | |
GE100ES | GE100ES-2RS | 100 | 150 | 70 | 55 | 109 | 610 | 3050 | 7 | 4.45 | |
GE110ES | GE110ES-2RS | 110 | 160 | 70 | 55 | 120 | 655 | 3250 | 6 | 4.82 | |
GE120ES | GE120ES-2RS | 120 | 180 | 85 | 70 | 130 | 950 | 4750 | 6 | 8.05 | |
GE140ES | GE140ES-2RS | 140 | 210 | 90 | 70 | 150 | 1080 | 5400 | 7 | 11.02 | |
GE160ES | GE160ES-2RS | 160 | 230 | 105 | 80 | 170 | 1370 | 6800 | 8 | 14.01 | |
GE180ES | GE180ES-2RS | GE180DS | 180 | 260 | 105 | 80 | 192 | 1530 | 7650 | 6 | 18.65 |
GE200ES | GE200ES-2RS | GE200DS | 200 | 290 | 130 | 100 | 212 | 2120 | 10600 | 7 | 28.03 |
GEG4E | 4 | 14 | 7 | 4 | 7 | 3.4 | 17 | 20 | 0.0045 | ||
GEG5E | 5 | 16 | 9 | 5 | 8 | 5.5 | 27 | 21 | 0.0066 | ||
GEG6E | 6 | 16 | 9 | 5 | 9 | 5.5 | 27 | 21 | 0.0081 | ||
GEG8E | 8 | 19 | 11 | 6 | 11 | 8.1 | 40 | 21 | 0.014 | ||
GEG10E | 10 | 22 | 12 | 7 | 13 | 10 | 54 | 18 | 0.571 | ||
GEG12E | 12 | 26 | 15 | 9 | 16 | 17 | 85 | 118 | 0.033 | ||
GEG15E | GEG15E-2RS | 15 | 30 | 16 | 10 | 19 | 21 | 106 | 16 | 0.049 | |
GEG17E | GEG17E-2RS | 17 | 35 | 20 | 12 | 21 | 30 | 146 | 19 | 0.083 | |
GEG20E | GEG20E-2RS | 20 | 42 | 25 | 16 | 24 | 48 | 240 | 17 | 0.153 | |
GEG25E | GEG25E-2RS | 25 | 47 | 28 | 18 | 29 | 62 | 310 | 17 | 0.203 | |
GEG30E | GEG30E-2RS | 30 | 55 | 32 | 20 | 34 | 80 | 400 | 17 | 0.304 | |
GEG35E | GEG35E-2RS | 35 | 62 | 35 | 22 | 39 | 100 | 500 | 16 | 0.408 | |
GEG40E | GEG40E-2RS | 40 | 68 | 40 | 25 | 44 | 127 | 640 | 17 | 0.542 | |
GEG45E | GEG45E-2RS | 45 | 75 | 43 | 28 | 50 | 156 | 780 | 15 | 0.713 | |
GEG50E | GEG50E-2RS | 50 | 90 | 56 | 36 | 57 | 245 | 1220 | 17 | 1.44 | |
GEG60E | GEG60E-2RS | 60 | 105 | 63 | 40 | 67 | 315 | 1560 | 17 | 1.6 | |
GEG70E | GEG70E-2RS | 70 | 120 | 70 | 45 | 77 | 400 | 2000 | 16 | 3.01 | |
GEG80E | GEG80E-2RS | 80 | 130 | 75 | 50 | 87 | 490 | 2450 | 14 | 3.64 | |
GEG90E | GEG90E-2RS | 90 | 150 | 85 | 55 | 98 | 610 | 3050 | 15 | 5.22 | |
GEEW35ES | GEEW35ES-2RS | 35 | 55 | 35 | 20 | 40 | 80 | 400 | 4 | 0.253 | |
GEEW40ES | GEEW40ES-2RS | 40 | 62 | 40 | 22 | 46 | 100 | 500 | 4 | 0.338 | |
GEEW45ES | GEEW45ES-2RS | 45 | 68 | 45 | 25 | 52 | 127 | 640 | 4 | 0.481 | |
GEEW50ES | GEEW50ES-2RS | 50 | 75 | 50 | 28 | 57 | 156 | 780 | 4 | 0.558 | |
GEEW60ES | GEEW60ES-2RS | 60 | 90 | 60 | 36 | 68 | 245 | 1220 | 3 | 1.15 | |
GEEW63ES | GEEW63ES-2RS | 63 | 95 | 63 | 36 | 71.5 | 245 | 1220 | 4 | 1.23 | |
GEEW70ES | GEEW70ES-2RS | 70 | 105 | 70 | 40 | 78 | 315 | 1560 | 4 | 1.71 | |
GEEW80ES | GEEW80ES-2RS | 80 | 120 | 80 | 45 | 91 | 400 | 2000 | 4 | 2.39 | |
GEEW100ES | GEEW100ES-2RS | 100 | 150 | 100 | 55 | 113 | 610 | 3050 | 4 | 4.8 | |
GEEW125ES | GEEW125ES-2RS | 125 | 180 | 125 | 70 | 138 | 950 | 4750 | 4 | 8.5 | |
GEEM20ES-2RS | 20 | 35 | 24 | 12 | 24 | 30 | 146 | 6 | 0.073 | ||
GEEM25ES-2RS | 25 | 42 | 29 | 16 | 29 | 48 | 240 | 4 | 0.13 | ||
GEEM30ES-2RS | 30 | 47 | 30 | 18 | 34 | 62 | 310 | 4 | 0.17 | ||
GEEM35ES-2RS | 35 | 55 | 35 | 20 | 40 | 80 | 400 | 4 | 0.25 | ||
GEEM40ES-2RS | 40 | 62 | 38 | 22 | 45 | 100 | 500 | 4 | 0.35 | ||
GEEM45ES-2RS | 45 | 68 | 40 | 25 | 52 | 127 | 640 | 4 | 0.49 | ||
GEEM50ES-2RS | 50 | 75 | 43 | 28 | 57 | 156 | 780 | 4 | 0.6 | ||
GEEM60ES-2RS | 60 | 90 | 54 | 36 | 68 | 245 | 1220 | 3 | 1.15 | ||
GEEM70ES-2RS | 70 | 105 | 65 | 40 | 78 | 315 | 1560 | 4 | 1.65 | ||
GEEM80ES-2RS | 80 | 120 | 74 | 45 | 90 | 400 | 2000 | 4 | 2.5 |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Rolling Element: | Single Row |
---|---|
Structure: | To The Heart |
Material: | Bearing Steel |
Load Direction: | Radial Spherical Plain Bearing |
Add Lubricant: | Non Self-lubricating |
Outer Structure: | Outer Ring of Single-Slit |
Customization: |
Available
| Customized Request |
---|
How do radial bearings contribute to reduced friction and smooth rotation in machinery?
Radial bearings play a crucial role in reducing friction and promoting smooth rotation in machinery. Their design and construction contribute to minimizing contact between moving parts, optimizing efficiency, and enhancing overall performance. Here is a detailed explanation of how radial bearings achieve reduced friction and smooth rotation:
1. Rolling Elements:
Radial bearings typically incorporate rolling elements, such as balls or rollers, between the inner and outer races. These rolling elements reduce friction compared to sliding contact between surfaces. As the bearing rotates, the rolling elements roll instead of slide, resulting in lower frictional forces and reduced energy loss. The rolling action of the elements contributes to smoother rotation and improved efficiency.
2. Lubrication:
Lubrication is essential for reducing friction and ensuring smooth rotation in radial bearings. Lubricants, such as oils or greases, are used to create a thin film between the rolling elements and raceways. This lubricating film separates the surfaces, minimizing direct contact and friction. The lubricant also helps to dissipate heat generated during operation, preventing excessive temperature rise and potential damage to the bearing. Proper lubrication is critical to maintaining low friction and promoting smooth rotation in radial bearings.
3. Bearing Clearance and Preload:
The clearance or preload adjustment in radial bearings also contributes to reduced friction and smooth rotation. Bearing clearance refers to the intentional space left between the rolling elements and raceways, allowing for thermal expansion and accommodating operating conditions. Adequate clearance ensures that the bearing components can move freely without excessive interference, minimizing friction. On the other hand, preload is a controlled axial force applied to eliminate clearance and maintain a slight internal load on the bearing. Preload helps to reduce internal clearances, improve stiffness, and minimize any potential play or vibration, resulting in smoother rotation.
4. Bearing Material and Surface Finish:
The choice of bearing material and surface finish significantly impacts friction and smooth rotation. Radial bearings are commonly made from materials such as steel, ceramic, or polymer composites. These materials offer excellent hardness, wear resistance, and low friction characteristics. Additionally, the surfaces of the bearing components undergo precise machining and finishing processes to achieve smoothness and minimize surface irregularities. The combination of suitable materials and high-quality surface finishes promotes reduced friction and smooth rotation in radial bearings.
5. Bearing Design and Internal Geometry:
The design and internal geometry of radial bearings are optimized to minimize friction and promote smooth rotation. Factors such as the number and size of rolling elements, the contact angle, and the curvature of the raceways are carefully engineered to ensure proper load distribution and minimize stress concentrations. Well-designed bearing cages also help maintain the correct spacing and alignment of the rolling elements, reducing friction and ensuring smooth rotation. The overall design and geometry of radial bearings are crucial for achieving optimal performance and minimizing frictional losses.
6. Precision Manufacturing:
Radial bearings are manufactured with high precision to achieve tight tolerances and minimize variations in dimensions. Precision manufacturing processes, such as grinding and superfinishing, ensure that the bearing components have accurate shapes and smooth surfaces. This precision manufacturing contributes to reduced friction and smooth rotation by minimizing irregularities and imperfections that can cause excess friction or vibration.
In summary, radial bearings contribute to reduced friction and smooth rotation in machinery through the use of rolling elements, proper lubrication, optimized bearing clearance or preload, suitable materials and surface finishes, well-engineered designs, and precision manufacturing. These factors work together to minimize contact, reduce frictional forces, and ensure efficient and reliable operation of machinery and equipment.
Can you explain the maintenance and installation considerations for radial bearings?
Maintenance and installation considerations are crucial for ensuring the optimal performance and longevity of radial bearings. Proper installation and regular maintenance practices help prevent premature bearing failure, minimize downtime, and maximize the efficiency of the bearing system. Here’s a detailed explanation of the maintenance and installation considerations for radial bearings:
1. Proper Handling and Storage:
Radial bearings should be handled with care to avoid damage to the bearing surfaces. They should be stored in a clean and dry environment, protected from contaminants, moisture, and extreme temperature conditions. When handling the bearings, clean hands or gloves should be used to prevent introducing dirt or grease to the bearing surfaces.
2. Correct Bearing Selection:
Proper bearing selection is essential for ensuring optimal performance and reliability. Factors such as load requirements, speed, temperature, and environmental conditions should be considered when choosing the appropriate radial bearing. Consulting bearing manufacturers or industry experts can assist in selecting the right bearing type, size, and design for the specific application.
3. Precise Shaft and Housing Preparation:
Prior to installation, the shaft and housing surfaces should be carefully inspected and prepared. They should be clean, smooth, and free from burrs, nicks, or other defects that could adversely affect the performance of the bearing. Proper shaft and housing preparation ensures proper fit, alignment, and load distribution, reducing the risk of premature wear or failure.
4. Correct Bearing Mounting:
During installation, proper mounting techniques should be followed to ensure the correct fit and alignment of the radial bearing. The bearing should be mounted using the appropriate tools and equipment, applying even and controlled force to avoid excessive load or damage to the bearing components. The manufacturer’s guidelines and recommendations should be followed for the specific bearing type and size.
5. Lubrication:
Proper lubrication is crucial for the performance and longevity of radial bearings. The correct type and quantity of lubricant should be used based on the manufacturer’s recommendations. Lubrication intervals should be followed, and contamination should be prevented by using clean lubricants and appropriate sealing solutions. Regular monitoring of lubrication conditions and timely replenishment or replacement of lubricants are essential maintenance practices for radial bearings.
6. Regular Inspection and Maintenance:
Regular inspection and maintenance help detect and address any potential issues before they escalate into major problems. Periodic inspections should be conducted to check for signs of wear, damage, or abnormal operating conditions. This may include monitoring vibration, temperature, noise levels, and visual examination of the bearing and surrounding components. Any identified issues should be addressed promptly through appropriate maintenance procedures, such as re-lubrication, re-alignment, or replacement of damaged components.
7. Training and Expertise:
Proper maintenance and installation of radial bearings require knowledge and expertise. It is beneficial to have trained personnel who understand the specific requirements and procedures for handling, installing, and maintaining radial bearings. Training programs or consulting services provided by bearing manufacturers or industry experts can help ensure that maintenance and installation practices are carried out correctly and effectively.
8. Documentation and Record-Keeping:
Maintaining accurate documentation and records of bearing installation, maintenance activities, and relevant operating conditions is essential. This information can help track the history of the bearings, identify recurring issues, and facilitate troubleshooting or future maintenance planning. It is important to record important details such as bearing type, size, lubrication specifications, maintenance dates, and any observations or actions taken during inspections.
By considering these maintenance and installation considerations, it is possible to optimize the performance, reliability, and lifespan of radial bearings. Proper handling, correct bearing selection, precise shaft and housing preparation, accurate mounting, appropriate lubrication, regular inspection and maintenance, training, and documentation are key elements in achieving efficient and trouble-free operation of radial bearings.
How do innovations and advancements in radial bearing technology impact their use?
Innovations and advancements in radial bearing technology have a significant impact on their use in various industries and applications. These advancements drive improvements in performance, reliability, efficiency, and versatility of radial bearings. Here’s a detailed explanation of how innovations and advancements in radial bearing technology impact their use:
1. Enhanced Performance:
Advancements in radial bearing technology lead to improved performance characteristics. This includes increased load capacities, higher rotational speeds, reduced friction, and enhanced stiffness. These improvements allow radial bearings to handle more demanding loads and operate in high-speed applications more effectively. Enhanced performance enables the use of radial bearings in a wider range of industrial applications, contributing to increased efficiency and productivity.
2. Extended Service Life:
Innovations in bearing materials, lubrication systems, and surface treatments result in extended service life for radial bearings. New materials with superior wear resistance and corrosion resistance properties allow bearings to withstand harsh environments and reduce the risk of premature failure. Advanced lubrication techniques, such as self-lubricating or solid lubricant coatings, minimize friction and wear, further prolonging the bearing’s service life. The ability of radial bearings to operate reliably for longer periods translates into reduced maintenance requirements and downtime.
3. Improved Reliability:
Advancements in radial bearing technology enhance their overall reliability. New designs and manufacturing techniques ensure consistent quality, dimensional accuracy, and precise tolerances, resulting in reliable performance under varying operating conditions. The use of advanced simulation and testing methods enables better prediction and understanding of bearing behavior, allowing for optimized designs and improved reliability. Enhanced reliability reduces the risk of unexpected bearing failures, which can lead to costly downtime and equipment damage.
4. Higher Efficiency:
Innovations in radial bearing technology contribute to higher efficiency in mechanical systems. Reduced friction and improved lubrication techniques minimize energy losses within the bearing, resulting in improved overall system efficiency. Bearings with lower friction help reduce power consumption and improve energy utilization, making them particularly beneficial in applications where energy efficiency is a priority, such as electric motors or automotive drivetrains.
5. Miniaturization and Compact Designs:
Advancements in radial bearing technology enable the development of smaller and more compact bearing designs. This is particularly important in industries where space constraints are a significant consideration. Miniaturized bearings allow for the design of smaller and lighter equipment without compromising performance. They find applications in industries such as aerospace, robotics, medical devices, and electronics, where size and weight reduction are crucial.
6. Specialized Applications:
Innovations in radial bearing technology have led to the development of specialized bearings tailored for specific applications. For example, advancements in bearing materials and designs have resulted in bearings capable of operating in extreme temperature or high-vibration environments. Specialized bearings designed for specific industries, such as the food and beverage or pharmaceutical sectors, meet stringent regulatory requirements regarding hygiene and contamination prevention. These specialized bearings expand the range of applications where radial bearings can be used effectively.
7. Integration with Sensor Technologies:
Advancements in sensor technologies have facilitated the integration of condition monitoring and predictive maintenance capabilities into radial bearings. Bearings equipped with sensors can provide real-time data on factors such as temperature, vibration, and load conditions. This allows for proactive maintenance and early detection of potential issues, enabling timely interventions to prevent unplanned downtime and optimize equipment performance.
8. Cost Optimization:
While innovations and advancements in radial bearing technology often involve initial investments in research and development, they can lead to long-term cost savings. Improved performance, extended service life, and reduced maintenance requirements result in lower operational costs over the bearing’s lifetime. Additionally, advancements in manufacturing processes and economies of scale may contribute to more affordable bearing options, making advanced radial bearing technology accessible to a wider range of applications.
By continually pushing the boundaries of radial bearing technology, innovations and advancements have a profound impact on their use across various industries. Enhanced performance, extended service life, improved reliability, higher efficiency, miniaturization, specialized applications, integration with sensor technologies, and cost optimization are some of the key benefits that result from these advancements. As a result, engineers and designers have access to a wider range of bearing options to meet the evolving needs of modern industrial applications.
editor by CX 2024-03-29